The Reasons Of Reality Television The Insanity Of...

Reality Insanity Astonishingly, reality TV has little reality in it at all. Most reality TV shows are scripted and edited to present an audience with unrealistic scenarios for entertainment. There are an abundance of reality TV genres to choose from, including competition, hidden camera, dating, and paranormal. Competition reality is based solely on a desire to win. Contestants use their strongest attributes to compete for a final prize, whether that be money or fame. Most of the time contestants are placed into a confined environment, being forced to live together in very close contact. This environment combined with the conflicting personalities of the contestants creates for a lot of drama, and drama is what keeps the audience†¦show more content†¦The purpose is to see how the surrounding onlookers will react or if they decide to get involved at all. This also creates an opportunity for the viewers at home to ask themselves what they would do. Dating reality is all about forming an emoti onal connection between the participants and the audience. The cast usually consists of a single contestant choosing from a large group of contenders. For instance, on The Bachelor the contestant is trying to figure out which contender is most suited for him while the audience is sitting at home making those same decisions, but instead of thinking about what’s best for the bachelor they make those decisions based off their own personal feelings. This keeps the audience watching until the very end to see if the bachelor ends up with the contender of their choice. Though possible, the likelihood of the final couple staying together is very slim. Paranormal reality focuses on keeping the audience on edge by exploring the unknown. The producers usually find a location that is said to have a high rate of paranormal activity. Before exploring the facility, they give a detailed history of the location which incorporates any witness accounts and any recent activity. The investigation will commonly take place after nightfall with all power in the facility shut down. From that point, the crew explores the facility using high tech equipment such asShow MoreRelatedThe Insanity Plea Essay1134 Words   |  5 PagesThe Insanity Plea The insanity plea is a poor excuse for serious lawbreakers, and should have no bearing in the sentencing of criminals. All criminal cases today have three ways in which a defendant can plea. Guilty, not guilty, or Insanity. The word insane is a legal term. Because research has identified many different mental illnesses of varying severities, it is now too simplistic to describe a severely mentally ill person merely as insane. The federal law states that insanity is a fairRead MoreFahrenheit 451 - Part I Discussion Outline (w/ Analysis and Questions)1089 Words   |  5 Pageshistory. These are two very symbolic things to our protagonist, Guy Montag. A career fireman in a futuristic world where books are forbidden and any sign of uniqueness is a sign of illness. Part one seeks to acclimate us to Montag’s disenchanted reality: his job, his house, his wife—and now—their new neighbor, Clarisse. Clarisse is an unorthodox, curious girl who Bradbury often describes her using the moon and various other flora and fauna to symbolize the young catalyst. Ray Bradbury’s uses a greatRead MoreBuddhism, The Noble Eightfold Path And The Four Noble Truths1650 Words   |  7 PagesBuddhism wa s an incredibly intriguing religion to me due to the emphasis placed on the reality that surrounds us, it’s a rational religion based on peace, self-understanding and the ultimate goal of nirvana. Buddhist followers live their life with three main goals; morality, meditation and enlightenment. Ultimately the core teachings of Buddhism are The Noble Eightfold Path and The Four Noble Truths. It is their lives journey to understand, live kindly and find their inner-peace. In a world so fullRead MoreNature vs. Nurture Essay1361 Words   |  6 Pagesboth biological and environmental factors. In many cases criminals share similar physical traits which the general population do not usually have. For example criminals have smaller brains than properly adjusted individuals. However biological reasons cannot solely be the cause of criminal behavior. Therefore, one must look to other sources as to how a criminal mind is developed. Social and environmental factors also are at faul t for developing a person to the point at which they are lead toRead More The Development of a Criminal Mind Essay1334 Words   |  6 Pagesfrom both biological and environmental factors. In many cases criminals share similar physical traits which the general population do not usually have. For example criminals have smaller brains than properly adjusted individuals. However biological reasons cannot solely be the cause of criminal behavior. Therefore, one must look to other sources as to how a criminal mind is developed. Social and environmental factors also are at fault for developing a person to the point at which they are lead to committingRead MoreHow does Sunset Boulevard represent the Hollywood Studio System?1897 Words   |  8 Pagesreleased in the 1950s and 60s, audiences started to see the demise of Hollywood as cinema going began to decline and the fierce competition of television almost proved too much for the well established system. Throughout this essay I will discu ss how Sunset Boulevard represents the Hollywood Studio System, as well as exploring post war literature giving reasons as to why the system began to crumble. I will begin my essay by looking closely at the narrative of Sunset Boulevard to see where and how theRead MoreAmerican Singer And Songwriter By Taylor Swift2071 Words   |  9 Pagesmany preconceived ideas about what it is, who it attracts, and how it attracts. Illustrations of this romantic type love are evident to us throughout our lives as images of love surround us through various media outlets such as, music, movies, and television; all demonstrating how to find, keep, hold onto, or let go of love. These outlets often portray love to be an instant â€Å"spark† of attraction, where a person or character feels a romantic attraction instantaneously for a complete stranger. AmericanRead MoreAldous Huxley s Brave New World1720 Words   |  7 Pageslife in the World State. Sports are very important to everyday life. But to even play the several different games and activities of sports, high-tech technological equipment is required. Entertainment is also highly regarded in th e World State. Television is completely reinvented in the society. There is technology where people can sit in simulation chairs that can make them experience the emotions of the characters while looking at the screen. This can be seen as a form of pleasure or satisfyingRead MoreSocial Critism Presented throughout Fantasy in Fahrenheit 451 by Ray Bradbury and The Memoirs of a Survivor by Doris Lessing1515 Words   |  6 Pagesnegative aspects that are present and shaped within society today. It is frequently due to the fact that we are vaguely distracted by small things such as cellphones, iPad’s and other electronic devices that are commonly used, and it is exactly for this reason that we tend to forget what are truly of value and of importance. This technologically advanced society is present in both novels but more so in Fahrenheit 351 than in The Memoirs of a Survivor. Furthermore, Bradbury and Lessing reinforce ideas ofRead MoreTechnology and Family Issues in The Veldt by Ray Bradbury Essay1493 Words   |  6 Pagesmore than what the parents can do. Throughout the story, the parents try to please their children but fail miserably. They try turning off the nursery and go on vacation. The children realize their tricks and eventually kill their own parents. This insanity in the story is similar to what Poe would write about. He wrote things such as writing about a man who sleeps with his dead wife’s coffin and a raven that chants â€Å"nevermore† and drives the narrator insane. The central idea is the man such as the

Software Architecture And Methodology As A Tool For...

ABSTRACT Nowadays, conventional software development methods have gradually been replaced by agile software development methods. This phenomenon is mainly due to the conventional methods’ shortcomings, including a slow adaptation to rapidly changing requirements, and a tendency to be over budget and behind schedule. This paper analyzes objectives, strengths, and weaknesses of both conventional and agile methods. This paper also briefly explains the Unified Process, and the common elements of the Scrum process. Finally, this paper suggests a new Component Integrated software development process that combines the Rational Unified Process with the Scrum process to accommodate the strengths of both methods while suppressing their weaknesses.†¦show more content†¦One system development methodology is not necessarily suitable for use by all projects. Each of the available methodologies is best suited for specific kinds of projects, based on various technical, organizational, project and team considerations. Conventional heavyweight, document-driven software development methods can be characterized as extensive planning, codified process, reuse, heavy documentation and big design up front. These are some reason that conventional methods have been replaced by lightweight agile software development methods mostly in small-scale and relatively simple projects. This phenomenon is mainly due to the conventional methods’ shortcomings, including a slow adaptation to rapidly changing business requirements, and a tendency to be over budget and behind schedule The conventional methods also have not able to provide dramatic improvements in productivity, reliability, and simplicity. Despite the existing shortcomings, the conventional methods are still widely used in industry, particularly, for large-scale projects. Conventional methods come with their straightforward, methodical, and structured nature, as well as their capability to provide predictability, stability, and high assurance. Agil e software development methods focus on iterative and incremental development, customer collaboration, and frequent delivery through a light and fast development life cycle. There are many positive benefits of the agile approaches. Software Architecture And Methodology As A Tool For... ABSTRACT Nowadays, traditional software processes have slowly taken the place of agile software Processes. This is mostly because of traditional processes have limitations, which holds a slow modification to quickly changing requirements, and a proclivity to go over cost of project and get late back in schedule. This paper explains objectives, pros, and cons of agile and traditional processes. It is also briefly describing the Unified Process as well as common elements of the Scrum process model. Lastly, it is proposing a new Component Integrated process model which integrates the Scrum process from agile and Unified Process from convential process. This new CIM process model will adapt the pros of both processes at the same time it will†¦show more content†¦These are some reason that traditional processes replace agile processes mainly in small and simple projects. This is happening because of traditional methods’ limitations and deficiencies, which includes a slow adaptatio n to business requirements changes, and a tendency to go over budget and as well as behind schedule. The traditional methods also lack in providing improvements in simplicity, productivity and reliability phenomena’s. Despite of these limitations, traditional methods are widely used by many software developers in projects. Traditional methods are capable to provide high assurance, predictability, and stability and their nature is structural, straightforward, and methodological. Agile processes mainly focus on incremental as well as iterative development. Also, frequent deliveries after each sprints and customer collaboration are key element of Agile. Agile process has many advantage such as short lifecycle, low bug-rate, high customer satisfaction, and fast adaptation to changing requirements. Despite the fact that agile process has many advantages, Software Organizations still using traditional process and not jumping into agile. We have summarized the characteristics, stren gths, and weaknesses and issues of the conventional and agile methods in below Table1. Table1. Comparison between Conventional and Agile Methods As mentioned in table1, it compares characteristics, strength and weakness and of agile andShow MoreRelatedSoftware Architecture And Methodology As A Tool For Efficient Software Engineering Process1304 Words   |  6 Pagesconventional software development methods have gradually been replaced by agile software development methods. This phenomenon is mainly due to the conventional methods’ shortcomings, including a slow adaptation to rapidly changing requirements, and a tendency to be over budget and behind schedule. This paper analyzes objectives, strengths, and weaknesses of both conventional and agile methods. This paper also briefly explains the Unified Process, and the common elements of the Scrum process. FinallyRead MoreWeb Development And Mobile Software Development1617 Words   |  7 PagesMETHODOLOGIES /ISSUES RELATED TO WEB AND MOBILE SOFTWARE DEVELOPMENT ABSTRACT: Due to the rapid development of technology, there is a rapid development in the case of telecommunications and IT field. Now a days every company is in the race to develop a web application or a mobile app which is user friendly and is more efficient. Many models came into the market and are succeeded but they are in race to develop new apps or new web applications. This paper discuss about the existing methodologiesRead MoreProcess Of Learning A Topic Software1556 Words   |  7 Pages Introduction: Software processes are the main software engineering topics that are difficult to be learned by regular lectures and in-class assignments. In this paper the author Jà ¶ran Pieper from University of Applied Science, Stralsund, Germany is trying to solve the problem of difficulty in learning the topic software process in software engineering. According the author the process of learning a topic (Software Process) is currently done by same procedures everywhere like lectures, class assignmentsRead MoreObject-oriented Programming and Systems Analysis Essay759 Words   |  4 Pages Complex organization process, used to develop and maintain computer-based information systems, also it’s used by a team of business and systems professionals. 2. How has a systems analysis and design changed over the past four decades? 1950s: focus on efficient automation of existing processes 1960s: advent of 3gl, faster and more reliable computers 1970s: system development becomes more like an engineering discipline 1980s: major breakthrough with 4Gl, case tools, object oriented methods Read MoreSoftware System Research Paper1381 Words   |  6 PagesManaging the development of major software systems and estimating the cost of that development have always been difficult, but they can be especially challenging in dynamic and continuously evolving government environments. At the same time, advances in computer power, computational analysis, and engineering methodologies are transforming the way new systems are developed. Project managers, designers and engineers face enormous challenges to develop, test, and build products on-time and on-budgetRead MoreEnterprise Architecture, Questions and Answer 1754 Words   |  7 Pagesissues in the practice of Enterprise Architecture. Enterprise Architecture continues to grow and expand with the growth and widespread integration of enterprise systems. With this progress there are consistently new problems which arise regarding Enterprise Architecture and its applications. Three of the major current issues which are faced by majority of Enterprise Architects are that Architects have no control over organisational changes, Enterprise Architecture is enormously time consuming, andRead MoreRational Unified Process1256 Words   |  6 PagesRational Unified Process (RUP) is like an IBM product and a CASE tool. After is explained what phases it has, what are the most common extensions thus what are its workflows more used. The Rational Unified Process (RUP) is a software design method created by the Rational Software Corporation and now is part of IBM developer software. This paper describes how to deploy software effectively. The Rational Unified Process (RUP) use commercially proven techniques, and is a heavy weight p rocess, and hence particularlyRead MoreDetermining The Efficient Tool For Business Process Management1536 Words   |  7 PagesDeciding the Efficient Tool for Business Process Management in Organizations Using Analytical Hierarchical Process Sravani Vadali Engineering Management University of Houston – Clear Lakeâ€Æ' Introduction to Business Process Management Business process management (BPM) is a management approach to make an enterprise’s activities and tasks to be more accurate, more competent and more efficient in adapting to the ever-changing needs of business. BPM is a far-reaching merging of Business Process ReengineeringRead MoreGile Methodology968 Words   |  4 PagesAgile Methodology Brian Crites System Analysis and Design July 16, 2012 Summer Term B 2012 Professor David A. Ostrowski Agile Methodology is an approach to project management that for the most part is used with software development. Agile Methodology is a very important part of software development. Throughout this paper I intend to discuss what the movement toward agility means for the future of systems analysis and design (Hoffer, George, amp; Valacich, 2011). In the year of 2001 manyRead MoreEnterprise Systems Architecture Of An Organization1523 Words   |  7 PagesEnterprise Systems Architecture Kerven Nelson Nova Southeastern University â€Æ' Enterprise system Architecture (ESA) is the overall IT system architecture of an organization. This architecture is the key part of managing and evolving IT systems, and therefore the business operations, of an organization. It consists of the architectures of individual systems and their relationships in the perspective of an organization. The Air Force has a limited idea of what enterprise architecture is, how it works

The History of the Piano Free Essays

Piano, stringed keyboard musical instrument, derived from the harpsichord and the clavichord. Also called the pianoforte, it differs from its predecessors principally in the introduction of a hammer-and-lever action that allows the player to modify the intensity of sound by the stronger or weaker touch of the fingers. For this reason the earliest known model (1709) was called a gravicembalo col pian e forte (Italian for â€Å"harpsichord with soft and loud†). We will write a custom essay sample on The History of the Piano or any similar topic only for you Order Now It was built by Bartolomeo Cristofori, a harpsichord maker of Florence, Italy, who is generally credited with inventing the piano. Two of his pianos still exist. The case of one, dated 1720, is in the Metropolitan Museum of Art, New York City; the other, dated 1726, is in a museum in Leipzig, Germany. Early Evolution of the Piano Beginning about 1725, when the noted German organ maker Gottfried Silbermann of Freiberg adopted Cristofori’s action, the next major developments took place in Germany. Perhaps the most important contribution was made by Johann Andreas Stein of Augsburg, who is credited with inventing an improved escapement that became the foundation of the â€Å"Viennese† piano praised by Wolfgang Amadeus Mozart and favored by most German composers of the late 18th and early 19th centuries. Twelve masters from central Germany migrated to London about 1760 and established the English school that, under John Broadwood and others, turned to the production of pianos of a stronger build, resembling those of our own day. The French manufacturer Sebastien Erard founded the French school in the 1790s, and in 1823 created the double action that is still in general use. By this time artisans in all Western nations were working to perfect the pianoforte. Numerous improvements were and are still being made in design and construction. Germany and the United States have long been distinguished for fine pianos, notably those of the German firm founded by Karl Bechstein and the American firms of Baldwin, Mason Hamlin, Steinway, and Chickering. The pianos of the Austrian Bosendorfer firm are also highly respected. The compass of the early piano was, like that of the harpsichord, only four, or at most, five octaves, but it has gradually increased to a compass of more than seven octaves as structural changes allowed for increases in tension amounting to several tons. Modern Structure The modern pianoforte has six major parts (in the following discussion, the numbers in parentheses refer to the accompanying diagram (Diagram #1 below) of the structure of a pianoforte): (1) The frame is usually made of iron. At the rear end is attached the string plate, into which the strings are fastened. In the front is the wrest plank, into which the tuning pins are set. Around these is wound the other end of the strings, and by turning these pins the tension of the strings is regulated. (2) The soundboard, a thin piece of fine-grained spruce placed under the strings, reinforces the tone by means of sympathetic vibration. (3) The strings, made of steel wire, increase in length and thickness from the treble to the bass. The higher pitches are each given two or three strings tuned alike. The lower ones are single strings made heavier by being overspun—that is, wound around with a coil of thin copper wire. (4) The action is the entire mechanism required for propelling the hammers against the strings (see Operation of the Action below). The most visible part of the action is the keyboard, a row of keys manipulated by the fingers. The keys corresponding to the natural tones are made of ivory or plastic; those corresponding to the chromatically altered tones, of ebony or plastic. (5) The pedals are levers pressed down by the feet. The damper, or loud pedal, raises all the dampers so that all the strings struck continue to vibrate even after the keys are released. The soft pedal either throws all the hammers nearer to the strings so that the striking distance is diminished by one-half, or shifts the hammers a little to one side so that only a single string instead of the two or three is struck. Some pianos have a third, or sustaining, pedal that does not raise all the dampers, but keeps raised only those already raised by the keys at the moment this pedal is applied. The use of these pedals can produce subtle changes in tone quality. Many upright pianos have been built in which the application of a pedal interposes a strip of felt between the hammers and strings so that only a very faint sound is produced. (6) According to the shape of the case, pianos are classified as grand, square, and upright. The square form (actually rectangular) is no longer built. For use in private homes it has been entirely superseded by the upright, which takes up far less room. Grand pianos are built in various sizes, from the full concert grand, 2. 69 m (8 ft 10 in) long, to the parlor or baby grand, less than 1. 8 m (6 ft) long. Upright pianos include the late 19th-century cottage piano, of which the upright grand is merely a larger form. The modern spinet and console pianos are small uprights related to the cottage piano. In the upright pianos the strings run vertically, or diagonally, from the top to the bottom of the instrument. Uprights and small grands are sometimes overstrung; that is, the bass strings are stretched diagonally across the shorter treble strings, thereby gaining extra length and improved tone quality. The combined tension of the strings on a concert grand piano is about 30 tons, on an upright about 14. How to cite The History of the Piano, Essay examples

Section 377A of the Penal Code

Question: Describe about the Section 377A of the Penal Code? Answer: The paper aims at providing persuasive arguments in order to defend the position of the researcher on the issue of Section 377A of the Penal Code. There have been numerous debates in the Singapore Parliament about Section 377A of the Penal Code. The highest court of Singapore has upheld Section 377A of the Penal Code due to which gay couples feel that their right to equality is being questioned. As per Section 377A of the Penal Code, any male person who is found to commit or abdets the commission by any other male person, in public or private. Section 377A of the Penal Code was introduced in the Singapore Penal Code in 1938 (Au, 2011). It was introduced to criminalise all non-penetrative acts between men. However, there is still plenty of research work going on to determine the reasons why Singapore administration sought to take up such an issue and enact such a law when there were more pressing issues. During the early decades of 20th century, prostitution was one of the primary con cerns in Singapore. Hence, British had found it difficult to use Section 377 in order to prosecute men who used to have sex with their male clients. In those cases, a new law of Section 377A which was weird to convict any form of non-penetrative sexual activity between men. Further, two men found naked in a place is sufficient to charge to be against those men. During 19980s, prostitution was one of the primary concerns in Britain. At that time, it was legal to have sex with teenage girls of age 13 years (Chen, 2010). However, buying and selling of girls alarmingly increased and it was alarmed by many middle class citizens. To address these concerns, Criminal Law Amendment Bill was drafted in 1981. However, a new scandal in 1985 aroused a new debate in Singapore Parliament about the law. There were numerous issues, such as social, religious, moral and ethnic surrounding the Section 377A of the Penal Code in Singapore. Religion has always been involved in the discussion regarding the same sex union and homosexuality. The religion in Singapore included mostly Buddhists, Christians, Muslims, Hindus and other religions. Most of the people belonged to Christianity i.e. 33.35% of the total population (Chen, 2010). They believed that homosexuality is sinful in eyes of God. Hence, Christianity didnt favour same sex unions. On the other hand, Hindus in Singapore had contrary beliefs and values to Christians. The general beliefs of a Hindu included karma, Dharma, Samsara and Moksha and they recognised a third sex in Vedas which is reference to LGBT in Kama Sutra. Hence, Hindus were in favour of same-sex unions or homosexuality. In spite of this, homosexuality or same-sex unions have been discouraged since it was believed that it was against religion. Besides the religious issues, there were many social issues surrounding the Section 377A of the penal code (Chen, 2010). In typical Singapore society, it was believed that heterosexuality was based on the ideologies that it is related to procreation while homosexuality was related to being stigmatized. Moreover, families in Singapore were very strict about their religion and hence opposed same-sex unions. The concept of heterosexual matrix was valid for typical Singapore families and when this matrix was altered, families were required to cope with the alteration. Families had to decide to either resist it or accept it. Alternatively, individuals had to face the reaction of society and families (Young, 2007). As a result, homosexuals choose not to announce their sexual orientation in order to safeguard the honour of their families and parents in society. Due to mass opposition of same-sex unions, Section 377A of the penal code had to establish. Hence, the penal code revised the law criminalising the men to make physical relations. As a result of the revision, Section 377 A was formed. Section 377 A is a law that prohibits adult men to indulge in oral and anal sex (Sanders, 2007). Following this, there were numerous debates carried by people who were against or for the legislation. Many online petitions were filed by the supporters of same-sex unions through keep377a.com and repeal377a.com (Gupta, 2006). The arguments presented in favour of 377a included the position of secular state and slippery slope argument. Foremost, it was put forward that secular state should accept the view of the majority and reject the view of minority. Members of Parliament in Singapore phrased that abolishing 377a would send wrong signal to the society that the living styles of the people have changed (Taylor, 2007). Hence, homosexuality could never become a lifestyle and acceptable social norm in Singapore. Secondly, slippery slope argument presented by MPs in parliament ruled out that same-sex unions and adoption of child by them should be legalised and then stalled before they come into effect. This is a scenario is Taiwan but this kind of step could lead numerous legislative problems in the Parlia ment and might also lead to societal issues due to wide-ranging views. Thirdly, passing a law prohibiting the male-male sex would protect traditional family structures and values (Gopalan, 2007). However, many studies reveal that 377a couldnt be regarded as a symbol of secular state as a secular state should balance the interest of different groups. 377a couldnt achieve neutrality (Sanders, 2007). In nutshell, it can be concluded that enactment of Section 377a was followed by mix reactions from different groups of society. On one hand, Christians were against the same-sex unions while on the other hand, Hindus were favouring it. These prejudices were found to come from incomplete and wrong information. Studies reveal that unbiased sex education can help people change their mindsets regarding the same-sex unions or homosexuality. Homosexuality is not illegal but Singaporeans are taught that it is illegal. References Au, A. (2011). "When you should vote PAP". Yawning Bread. Chen, J. (2010). "Singapore's Culture War Over Section 377A: Through the Lens of Public Choice and Multi-Lingual Research". Social Science Research Network. Young, T. (2007). "Our Time Has Come". Trevvy. Sanders, D. (2007), (PDF). "377 and the unnatural afterlife of British colonialism". Fridae. Taylor, P. (2007). "Why Section 377A is redundant". Yawning Bread. Gopalan, M. (2007). "A heftier list of s. 377A cases". Yawning Bread. Sanders, D. (2007). "The mystery of 377". Fridae. Gupta, A. (2006). "Section 377 and the Dignity of Indian Homosexuals". The Economic and Political Weekly.

Btec Level Extended Diploma in Music free essay sample

Over the past three decades, in the recording studio a widespread of technical changes have occurred. This has changed music on a whole. Factors such as studio production, the role of the producer and the recording engineer have also been altered drastically in music by technology. The Internet, digital formats and industry progressions are known to have caused changes too. Particularly, the computer industry introduced many digital technologies over these decades. At the same time, the music Industry changed as did customer habits. As a result, current production raciest have been shaped by several outside influences that include both technical and business factors, Since the us, the computer, music. And audio Industries have begun to influence one another. Over the past few decades there have been many changes in the Music Industries; many changes which have impacted studio production. Throughout recording history the music industry part has been to make a profit of recorded music. We will write a custom essay sample on Btec Level Extended Diploma in Music or any similar topic specifically for you Do Not WasteYour Time HIRE WRITER Only 13.90 / page The commercial advertising and distribution of recorded music is definitely the greatest motivating factor driving both the audio and cording industries.This is a result of changes in the sales of recordings lead to changes In the adoption of technology and also to the development of studio production. Major labels control most of the market which is why we have a lot of what we call mainstream music. There are Independent labels, but Major labels basically still control what music Is recorded and distributed. The music industry has come a long way since those dreadful days of the mono recordings. Back then, artists, producers, and engineers didnt have as much of a choice of what equipment that loud use to get their recordings done.With the advancement In technology and new innovations constantly being created in the music industry, the opportunities are endless. If you look up the definition of technology you will see the words industry and commerce, which to me just means growth and development. Technology has and will continue to influence growth and development in the music Industry. With the growth of technology, the technical end of producing and engineering has become somewhat a quicker task. For example, the introduction of yester real time messages synchronized drum machines, sequences and other rhythmic devices.System real time messages are dropped into the data stream as required, and have priority over other messages In order to mainstream synchronization at all times. In other advances in technology has allowed these devices to operate with timing clocks so everything does not have to be done completely be hand anymore. As music production and recording systems become more complex and sophisticated, the need for intuitive, easy to use controls over then came essential if they are to be used effectively.Technology has made music systems become more and more sophisticated, so the tasks involved in the successful control of these systems has become Increasingly complex. Technology has also brought about a new language to go with the systems we use in the industry today. Language, youre only half way there. Technology has not only brought about new systems on which we make music but a whole language to go with it. There is enough terminology that goes with the applications to fill a small dictionary.

Im Writing a Trilogy (and How You Can, Too)

Im Writing a Trilogy (and How You Can, Too) Why I'm Writing a Trilogy - and Maybe You Should, Too After graduating with a degree in Biological Anthropology, Kara Timmins is now bringing her keen interest in evolutionary processes and natural systems into the fantasy genre with her first major release, Eloy's Discovery - book one in a trilogy. In this article, she talks about the power of three when it comes to storytelling, and offers tips for telling a cohesive, dynamic story in three parts. We can see evidence of the satisfaction found in groups of three all around us: Earth, Wind Fire; Lock, Stock, and Barrel (or Lock, Shock, and Barrel for you Nightmare Before Christmas fans); or The Good, The Bad and The Ugly. It’s everywhere.To sum up: people like trios.Now, enough about the mind and 600-year old art. Let’s talk about structuring a trilogy.The structure of my trilogyIt’s not an accident that my series is comprised of three books. Consumers are primed to understand and appreciate things in threes: as readers, we’re looking for ways to link, group, and interpret stories. This is an opportunity for writers, and I kept these expectations in mind while writing my series, The Eloy Trilogy.Each book in the trilogy is titled after a different phase of life: Discovery, Challenge, and Legacy, and is meant to feel like a different part of life. Within that framework, I’ve also broken up the three stories into three different obstacles: book one is man vs. circumstance, book two is man vs. man, and book three is man vs. nature.While it is a fantasy with magic and monsters, the structure of the novel is intended to represent familiar and relatable stages of life. A first love is a first love - whether you’re fighting ground-dwelling creatures or trying to get through sixth period in high school.Filling in the gaps between sequels and prequelsThe story is broken up into three for the reader, but not for Eloy, my protagonist. For Eloy, it’s just his life. Recognizing the distinction between what the reader sees and what the character sees helps create a sense of a gradient (another thing our minds like). For me, that transition is the best way to include parts of what happened in the past book into the next one in the series, without having to rely on an â€Å"info dump.† Eloy is a person, and though he lives and struggles in a world very different from our own, his underlying structure is the same as someone living: his past doesn’t fall away from him. He uses what has happened to him to try and make sense of the present and predict the future. This is where that gradient lives, in his reflection of the past and his actions based on that. Bringing a character's past into their present is the best way to avoid info-dumps in a book series. Finding the right editor for my trilogyIncorporating these layers feels like a lot - and it is! It’s hard to monitor cohesion when we’re shoulder-deep in a lump of clay on the spinning wheel.One of the most important aspects of writing The Eloy Trilogy was finding an editor willing to believe in the intention I have for this story. And I have found that in Chersti Nieveen. Chersti provides me guidance by steering my voice; she elevates it and keeps it on course. She knows what I’m trying to do, and more importantly, she knows what the audience wants. She’s there for me when a small change in book one causes rippling edits in book three: like combing out tangles, and just as painful.We’re united in our effort to link the business with the art, and, like Eloy surrounding himself with those who thrive where he is weak, it’s how I can foresee following this journey to the end. The rule of three has been used in storytelling for centuries. Read how it can benefit your book. The possibilities of what we can do using this already established structure of three are limitless. Readers will forgive us for selling three books when there’s a reason for it; when we’re giving them more than three free-floating stories. We may not be Hieronymus Bosch, but we can give them art.Eloy's Discovery, the first book in The Eloy Trilogy, is available in paperback and on Amazon Kindle.For more tips on writing a trilogy, check out our past Reedsy Live video: Writing a Genre Series: The Perils and Pitfalls.Please share your thoughts, experiences, or any questions for Kara Timmins in the comments below!

City of Constantine Assignment Example | Topics and Well Written Essays - 500 words

City of Constantine - Assignment Example Through the presence of his empress wife Theodora and two generals, namely Belisarius and Narses, Africa and Italy was recovered from Vandals and Ostrogoths respectively. Success was not on his side in the struggle against Persians and avoiding attacks of the Bulgars and Slavs. The greatest achievement of Justinian was the Corpus Juris Civilis, which refers to the codification of Roman law. It was also during Justinian time that many public works took place, and one structure worth mentioning due to its enormous and meticulous construction is the Church of Hagia Sophia. It was designed by the imperial architects of Justinian, Anthemius of Tralles and Isidorus of Miletus, and was built from 532 to 537. It was constructed by Constantius II in 360, after the declaration of Byzantium as the capital of the Roman Empire. Hagia Sophia was burned in 404 and was reconstructed in 415 by Theodosius II, but was burned again in 532. It collapsed in 558 due to an earthquake and was rebuilt again i n 563. Constantinople was attacked by the Persians, Arabs, Russians, and Bulgars from 6th to 13th century, and members of the fourth crusade in the succeeding years due to its strategic location in terms of transport and trade among continents.